What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * or "Thumbs down/up" symbol are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

FACP IQ8Control M for 19" rack

808219

Approval: VdS, CNBOP, BOSEC

As 808004 but 19" version (7 HU) for rack installation.

Features & Benefits
Technical Data
Accessories
Documents

Max. five micromodules, with peripheral module Part No. 772477, up to five esserbus analog loop modules (system supports up to 635 digital loop addresses in total)
Max. seven micromodules, with extension module Part No. 772476, up to seven esserbus analog loop modules (system supports up to 889 digital loop addresses in total)
Short circuit and open circuit tolerant loop operation
Loop installation with I-Y(ST)Y 0.8 mm cable for a maximum length of 3.5 km
Up to 127 esserbus devices (fire detectors and/or manual call points)/detector zones per loop
Up to 32 esserbus transponders per loop/operation of wireless components (see chapter 10)
Operation types TM and PM as per DIN VDE 0833 - 2 to avoid unwanted alarms being triggered
Fire brigade operating panel and transmission interface on the peripheral module
Three common relays, freely programmable, monitored, floating for up to 30 V DC/1A (on the peripheral module)
TTY or RS 485 or RS 232 interface
Integration in the short circuit and open circuit resistant essernet network with up to 31 fire detection panels depends on transmission rate
Connection to graphical supervisor WINMAG via serial essernet interface (SEI)
Operating panel with alphanumerical display
Large LCD display with 8 rows x 40 characters
Event memory for up to 10,000 events
All Systems 8000 micromodules are compatible
Printer interface for internal printer
Two batteries with monitoring circuit
Monitored input for external power supply unit

Additional features for powered loop

Max. 6 analog powered loops and expandable up to 127 loop devices (per loop) in mixed mode / loop powered and non-loop powered (system supports up to 762 digital loop addresses in total)
esserbus PLus (Powered Loop) supplied, synchronously controlled, acoustic alarm signaling devices as per DIN EN 54 - 3 with alarm tone as per DIN 33404
Up to 48 powered loop base sounders (series 9200) per loop
Up to 32 powered loop IQ8Alarm per loop
Up to 48 IQ8Quad with alarm device per loop

Additional Information:
The operating front must be ordered separately and is not included in the price.

Scope of Delivery:
FACP IQ8Control M 808004, including 19" mounting frame and flat cable for 19" installation.

Battery capacity	max. 2 x 12 V/24 Ah
Output voltage	12 V DC
Color	gray similar to Pantone 538
Housing	ABS, 10 % glass fiber reinforced, V - 0
Storage temperature	-10 °C ... 50 °C
Rated voltage	230 V AC
Rated frequency	50 ... 60 Hz
Rated current	0.35 A (standard); 0.7 A (powered loop)
Air humidity	< 95 % (non-condensing)
Quiescent current	approx. 215 mA (basic configuration without operating unit)
	approx. 300 mA (basic configuration with operating unit)
Type of protection	IP30
Current consumption for ext. devices	2 A
Ambient temperature	-5 °C ... 45 °C
Weight	approx. 11.5 kg
Dimensions	W: 450 mm H: 640 mm D: 185 mm
Declaration of Performance	DoP-20827130701

Austria	German
Czech Republic	Czech
Poland	Polish
Romania	Romanian
Russia	Russian
Slovakia	Czech
Turkey	Turkish
Ukraine	Russian

Europe

Business

FACP IQ8Control M for 19" rack

808219

Features & Benefits

Technical Data

Accessories

Documents